ACL & PCL Knee Arthroscopy Instrument Set – Stainless Steel
ACL & PCL Knee Arthroscopy Instrument Set – Stainless Steel
ACL & PCL Knee Arthroscopy Instrument Set – Stainless Steel

ACL & PCL Knee Arthroscopy Instrument Set – Stainless Steel Orthopedic Surgical Instruments for ACL & PCL Reconstruction

Write A Review
Regular price
$1,250.00
Sale price
$1,250.00
Regular price
$1,650.00
FDA
CE Mark
ISO 13485 Certified
SFDA Saudi Arabia
CFDA China

Ordered

...

Shipped

...

Delivered

...

The ACL & PCL Knee Arthroscopy Instrument Set features precision stainless steel instruments for knee arthroscopy and ligament procedures. Durable, corrosion-resistant, and designed for controlled orthopedic handling.

Instrument Configuration

35 Surgical Instruments + 1 Aluminium Graphic Case

  1. Drill Guide – 1 Pc
  2. Angled Bullet – 1 Pc
  3. ACL Elbow Aimer – 1 Pc
  4. PCL Tibial Aimer – 1 Pc
  5. PCL Femoral Aimer – 1 Pc
  6. Drill Bit Passing Pin: 2.4 mm diameter – 1 Pc
  7. Graft Passing Pin – Drill Tip: Beadth Pin – 1 Pc
  8. Graft Passing Pin – Diamond Tip: Beadth Pin – 1 Pc
  9. Cannulated Reamer: 6.0 mm – 1 Pc
  10. Cannulated Reamer: 7.0 mm – 1 Pc
  11. Cannulated Reamer: 8.0 mm – 1 Pc
  12. Cannulated Reamer: 9.0 mm – 1 Pc
  13. Cannulated Reamer: 10.0 mm – 1 Pc
  14. Cannulated Tibial Reamer: 6.0 mm – 1 Pc
  15. Cannulated Tibial Reamer: 7.0 mm – 1 Pc
  16. Cannulated Tibial Reamer: 8.0 mm – 1 Pc
  17. Cannulated Tibial Reamer: 9.0 mm – 1 Pc
  18. Cannulated Tibial Reamer: 10.0 mm – 1 Pc
  19. Cannulated Tibial Reamer: 11.0 mm – 1 Pc
  20. Endoscopic Reamer: 4.7 mm – 1 Pc
  21. Depth Gauge for ACL/PCL Reconstruction – 1 Pc
  22. Transportal Femoral Aimer: 6 mm – 1 Pc
  23. Tunnel Plug: 7–8 mm – 1 Pc
  24. Tunnel Plug: 8–9 mm – 1 Pc
  25. Tunnel Plug: 9–10 mm – 1 Pc
  26. Cannulated Screwdriver for Interference Screws – 1 Pc
  27. Arthroscopic Probe – 1 Pc
  28. Graft Prep Station – 1 Pc
  29. Graft Sizing Block: 6–12 mm sizes – 1 Pc
  30. Tendon Stripper – Closed End: 7 mm – 1 Pc
  31. Tendon Stripper – Open End: 7 mm – 1 Pc
  32. Straight Rasp – 1 Pc
  33. Convex Rasp – 1 Pc
  34. Half-Round Rasp – 1 Pc
  35. Notchplasty Curette – 1 Pc
  36. Femoral PCL Elevator – 1 Pc

Use

  • For use by trained medical, dental, and surgical professionals only.
  • Inspect every instrument before use. Do not use an instrument that is bent, cracked, or damaged, or whose joints or tips do not align properly.
  • Unless stated otherwise on the product page, instruments are supplied non-sterile. Clean and sterilize them before first use.
  • Use each instrument only for its intended purpose. Do not use it as a lever, chisel, or screwdriver.

Cleaning & Care

  • Rinse instruments immediately after use to remove blood and debris. Do not allow them to dry with residue on the surface.
  • Clean with a neutral pH detergent or enzymatic cleaner, using a soft brush or an ultrasonic cleaner. Avoid steel wool and abrasive pads.
  • Avoid prolonged contact with saline, chlorine, bleach, or other harsh chemicals, as they can cause pitting and corrosion.
  • Rinse thoroughly with distilled or demineralized water and dry completely before sterilizing or storing.
  • Lubricate hinges and moving parts regularly with a water-soluble instrument lubricant.

Sterilization & Storage

  • Sterilize by steam autoclave following your facility's validated protocol and the sterilizer manufacturer's instructions.
  • Open hinged instruments (scissors, forceps, clamps) before sterilizing so steam can reach all surfaces.
  • Do not mix stainless steel instruments with carbon steel or other metals during cleaning or sterilization.
  • Store in a clean, dry place away from moisture and corrosive substances. Keep out of reach of children.

At KT Surgico, quality is at the heart of everything we make. We are a manufacturer and exporter of surgical, dental, orthopedic, and veterinary instruments, built on decades of craftsmanship, precision, and trust.

Every instrument is made from premium-grade stainless steel and is carefully machined, finished, and inspected before it leaves our facility, so you receive instruments that deliver smooth action, corrosion resistance, and long-lasting performance.

  • Premium materials: high-grade stainless steel for strength and durability.
  • Precision manufacturing: accurate alignment, sharp edges, and a fine finish.
  • Certified quality: FDA, CE, CFDA, SFDA, and ISO certified.
  • Factory-direct value: competitive wholesale pricing with no middlemen.
  • OEM & private label: custom manufacturing available for your brand.
  • Worldwide shipping: reliable delivery to hospitals, clinics, and distributors across the globe.

We stand behind every product we ship. If you have any question about this product, please contact our team.